Freight Class Calculator
Enter each pallet or crate as you will hand it to the carrier and get its density in pounds per cubic foot and the matching NMFC class on the 13-class scale in force since July 2025. Add several units to class a mixed shipment.
Rates verified Nov 9, 2026Source: NMFTA — Density and class breaks for the 13-sub structure (Docket 2025-1)
Density and estimated class
Freight class
100
Density
9.38
pounds per cubic foot
500 lb ÷ 53.33 cubic feet = 9.38 pcf, which falls in sub 6 (8 to under 10 pcf).
At this size, 33.4 lb more (or a smaller footprint) would reach class 92.5, usually a cheaper rate.
| Density (pcf) | Class |
|---|---|
| under 1 | 400 |
| 1 to under 2 | 300 |
| 2 to under 4 | 250 |
| 4 to under 6 | 175 |
| 6 to under 8 | 125 |
| 8 to under 10 | 100 |
| 10 to under 12 | 92.5 |
| 12 to under 15 | 85 |
| 15 to under 22.5 | 70 |
| 22.5 to under 30 | 65 |
| 30 to under 35 | 60 |
| 35 to under 50 | 55 |
| 50 or more | 50 |
How density sets the class
- Measure the greatest length, width and height of each handling unit in inches, including the pallet and any overhang.
- Multiply them and divide by 1,728 to get cubic feet; multiply by the number of identical units.
- Divide the total weight in pounds by the total cubic feet. That is the density.
- Find the density band below. Each band is a subprovision of the NMFC density scale with its own class.
Worked example
A standard 48 × 40 inch pallet stacked to 48 inches high weighs 500 lb with its contents. Its volume is 48 × 40 × 48 = 92,160 cubic inches, or 53.33 cubic feet. Density is 500 ÷ 53.33 = 9.38 pounds per cubic foot, which is in the 8 to under 10 band: class 100. Adding 34 lb of product in the same space would lift density to 10 and the class to 92.5. Cutting the stack to 42 inches with the same 500 lb would do the same.
Mixed shipments
When a shipment has several handling units of the same density-based commodity, add the cubic feet of every unit and the weight of every unit, then divide. Two 48 × 40 × 40 pallets at 400 lb and one 48 × 40 × 20 pallet at 150 lb total 111.1 cubic feet and 950 lb, a density of 8.55 and class 100. Use the “Add a different-sized unit” button to enter them.
Why it matters for small sellers
Class drives the LTL rate per hundredweight, and the gap between neighbouring classes is often 10% or more. Shipping inventory to an Amazon warehouse or a 3PL on a tall, light pallet can cost far more than the same goods packed denser. Pair this with the pallet calculator to plan a denser load before you book.
Questions sellers ask
- What is freight class?
- A number from 50 to 500 that the National Motor Freight Classification (NMFC) assigns to goods shipped less-than-truckload (LTL). Lower classes are cheaper to ship. For many commodities the class is set by density: how many pounds the shipment weighs per cubic foot of space it takes on the truck.
- What changed in July 2025?
- Under Docket 2025-1, effective 19 July 2025, the NMFC density scale grew from 11 to 13 subprovisions. Densities of 30 to under 35 pounds per cubic foot are class 60, 35 to under 50 are class 55, and 50 or more are class 50. Many commodities that used to have their own fixed class were also moved onto the density scale.
- How do I measure correctly?
- Measure each handling unit as you hand it to the carrier: the greatest length, width and height in inches including the pallet and anything that sticks out, multiply, and divide by 1,728 to get cubic feet. Weigh the whole unit including the pallet and packaging. Carriers re-measure and re-weigh, so rounding down will usually be corrected on the invoice.
- Is the calculated class always my class?
- No. The density scale applies to items whose NMFC entry is density-based. Some commodities have a fixed class or their own scale, and hazardous materials can change the class. Check your item's NMFC number with your carrier or the NMFTA's ClassIT+ service before booking; this calculator gives the density-based estimate.
- How can I get a lower class?
- Raise density: use a smaller pallet footprint, stack higher within the carrier's limits, remove air from cartons, and combine light loose freight on one pallet. The calculator shows how many extra pounds at the same size would drop the shipment into the next class.
Related calculators
- Pallet Calculator — boxes per palletBoxes per layer and per pallet with column and mixed patterns, height and weight limits, and a diagram.
- Dimensional Weight Calculator (USPS, UPS, FedEx)Billable weight for all three carriers at once, with the 2026 divisors and rounding rules.
- Box Size CalculatorThe smallest stock box that fits your item with padding, and what it does to dimensional weight.
- USPS Cubic Pricing CalculatorEligibility and cubic tier for boxes and soft packs, rounded down to the quarter inch the way USPS does.
Sources and verification dates
- NMFTA — Density and class breaks for the 13-sub structure (Docket 2025-1) — checked Nov 9, 2026, in effect since Jul 19, 2025
- NMFTA — Calculating density best practices — checked Nov 9, 2026
Every value on this page is read from the linked official pages on the date shown. If a platform changes a fee, the change log records the old and new values and the effective date.